ADG-210 ASELSAN Directional Gyro

ADG-210 is an attitude determination system for various platforms. ADG-210 provides attitude, angular velocity and linear acceleration to the host vehicle systems continuously.

ADG-210 consists of strap down inertial measurement unit, system processor unit, power supply unit and chassis.

ADG-210 is a cost effective solution for all types of platforms requiring attitude during their mission.

ADG-210 is an open architecture and hardware/ software flexible unit which can be adapted to various platforms.

Long mean time between failure (MTBF) and internal built in test capability reduces the logistics requirement to a minimum. ADG-210 does not require periodic maintenance.

Important Features

Technical Specifications

  • Roll, Pitch And Yaw Angle Outputs
  • Angular Rate Output
  • Linear Acceleration Output
  • Low Power Dissipation (12 W, 28 VDC)
  • Built-In Test Capability
  • Boresight Interface
  • Field Programmable Software
  • No Periodic Maintenance

System Operational Modes

  • Continuous Output Mode
  • Polled Output Mode

System Interfaces

  • MIL-STD-704F Electrical Power Interface
  • RS422 Serial User Interface
  • High Speed RS422 Asynchronous Serial Test Interface

Performance

ParameterPerformance Specifications
Yaw Angle (long term period)20 deg / hour
Yaw Angle (short term period)0.5 deg
Roll and Pitch Angle (long term period)1 deg
Roll and Pitch Angle (short term period)0.5 deg
Angular Rate (x, y, z)0.25 deg / sec
Accelerometer Bias (x, y, z)24 mg

Start-Up Time

  • 10 sec

Environmental Conditions

  • MIL-STD-810G

Electromagnetic Environmental Effects

  • MIL-STD-461F

Physical Specifications

  • Dimensions: 152 mm (H) x 127 (D) x 109 mm (W) (without connector)
  • Weight: <2 kg